Manual Download

Samsung Grand Neo I9060 Mic Solution Jumper Problem Ways Microphone

Samsung Grand Neo I9060 Mic problem can be solve in a few steps as given in this post.How we can find Mic fault into a cellphone is very easy way.when ever our voice can not reach to destination monbile phone or we can not recored our own voice in voice recorder of cell phone it means it Mic not working.If a Samsung Grand Neo I9060 Mic is not working then Mic problem can be solve in given bellow steps that are provided in diagram bellow.

First step is open mobile and check Samsung Grand Neo I9060 Mic points on borad if there is a good value in it then change Mic with new one.Problem will be solve. if only mic points do not show value then chek all mic track and parts that are used in mic function in Samsung Grand Neo I9060.all mic parts and track are given in bellow diagram check all these parts and components and if necesory resold or change them.this will help you in Samsung Grand Neo I9060 Mic Solution Jumper Problem Ways Microphone

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.



Samsung Grand Neo I9060,Nokia,Mic,microphone,Solution,Jumper,Problem,Ways



Samsung Grand Neo I9060 Mic Solution Jumper Problem Ways Mic Not Working Microphone

Samsung Grand Neo I9060,Nokia,Mic,Microphone,Mic Problem,Mic Solution,Mic Jumpers,Mic Ways

Samsung Grand Neo I9060 Speaker Solution Jumper Problem Ways Earpeace

if we have a speaker problem in Samsung Grand Neo I9060 we will not be able to hear voice of call.we can temporary solve this issu by using Loud Speaker but to fix this problem we have to do a few basic diagnostics and steps to solve Samsung Grand Neo I9060 Speaker Solution Jumper Problem Ways Earpeace.

Open Mobile and check speaker points with a meter if they do not show continuty then speaker is dead and if they show a good value chak speaker attachement prints on board do they have value also then change speaker with new one.if speaker changing can not solve this issue check all these parts and track that used in speaker function in Samsung Grand Neo I9060.

All parts components and tracks can be found in diagram above so check these components and also clean near by area of these parts.dry it with hot air and ceck all tracks with meter if missing apply jumpers and you may can change resold or replace these parts one by one till you solve Samsung Grand Neo I9060 Speaker Solution Jumper Problem Ways Earpeace

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.


Samsung Grand Neo I9060,Nokia,Speaker ,Earpeace,Solution,Jumper,Problem,Ways

Samsung Grand Neo I9060 Speaker Solution Jumper Problem Ways Speaker Not Working Earpeace

Samsung Grand Neo I9060,Nokia,Speaker,Earpeace,Speaker Problem,Speaker Solution,Speaker Jumpers,Speaker Ways

Samsung Grand Neo I9060 Ringer Solution Jumper Problem Ways

Ringer problem in Samsung Grand Neo I9060 can be cause of no Ringtones Voice and also no loud speaker calls.if ringer is not working then we can not use loudspeaker and we can not play music.in cause of damage ringer ringtones volume can be low also.For solving Samsung Grand Neo I9060 Ringer Solution Jumper Problem Ways use daigram below.

If there is any water damge or rust on mother board then clean it with electronic cleaner hot air for a few mint so that it can be dry.

check ringers point after opening the mobile.if ringers point is not working and its value is not right then replace it with new ringer.problem will be solved.if problem will not be solve then check ringers point on board.If there value is not right then check parts and components with there path from above diagram.If some path is missing then apply jumper.If any part and components is not working replace it with new one.


Samsung Grand Neo I9060,Nokia,Ringer,Solution,Jumper,Problem,Ways

Samsung Grand Neo I9060 Ringer Solution Jumper Problem Ways Ringer Not Working

Samsung Grand Neo I9060,Nokia,Ringer,Ringer Problem,Ringer Solution,Ringer Jumpers,Ringer Ways

Samsung Grand Neo I9060 Voluem Up Down Keys Not Working Problem Solution Jumpers

Problem:-
1-Samsung Grand Neo I9060 Volume Up Key is Not Working.
2-Samsung Grand Neo I9060 Volume Down Key is Not Working.
Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Samsung Grand Neo I9060 if a few parts are damage in this board.So that they can be replaced.

Solution:-
If Volume Up or Down key is not working in Samsung Grand Neo I9060 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.

Samsung Grand Neo I9060 Insert Sim IC Solution Jumper Problem Ways

in case of insert sim problem in Samsung Grand Neo I9060 it will show insert sim, sim not valid, and may not show signal.to solve Samsung Grand Neo I9060 Insert Sim IC Solution Jumper Problem Ways we have to do a few simple steps as given in this post.in first step replace you sim and try it.scratch sim points in mobile slightly then try.

after dis assembly check all sim jack points at mother board with meter.check all these parts and track that are given in above diagram and if any of them is missing apply jumpers to make that path in good condition.if any of the components is missing replace it with new.

you can change sim ic also and may can apply jumpers after removing ic from mother board.there are some posts also to describe that how to make jumpers in sim ic to solve insert sim problem.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.


Samsung Grand Neo I9060,Nokia,Insert Sim,Sim,Solution,Jumper,Problem,Ways

Samsung Grand Neo I9060 Insert Sim IC Solution Jumper Problem Ways Sim Not Working Sim Not Valid

Samsung Grand Neo I9060,Nokia,Insert Sim,Sim,Insert Sim Problem,Insert Sim Solution,Insert Sim Jumpers,Insert Sim Ways

Samsung Grand Neo I9060 LCD Display IC Solution Jumper Problem Ways

if you have LCD display problem in Samsung Grand Neo I9060 it will not show any thing on display screen.it can be blanck no light or dim display also.Samsung Grand Neo I9060 LCD Display IC Solution Jumper Problem Ways can be solve with a few steps that are given in this post.Look at diagram bellow and folw instructions.

after dis assambling Mobile phone check whole board for rust carbon or water damages.clean lcd jack and mother board then apply hot air to dry it for a few mints.change lcd with new one if display is ok then fine else heck lcd jack prints value or remove it and replae with new.

else try all paths tracks and components and parts that are given in diagram above if any path is missing aplly jumpers and if parts are damaged change them.

For more information and new tips and tricks about this problem solution keep visiting this page we will update it if there will be new updates.some related post are also given below you can read more about mobile phone.

Please note that although every diagram & solution posted on our website has been tested by one or more members of our team before posting,so we will not be responsible for any loss or damage, including personal injury.Use this repair solutions at your own risk.


Samsung Grand Neo I9060,Nokia,LCD,Display,Solution,Jumper,Problem,Ways

Samsung Grand Neo I9060 LCD Display IC Solution Jumper Problem Ways LCD Display Not Working

Samsung Grand Neo I9060,Nokia,LCD Display,Display Problem,Display Solution,Display Jumpers,Display Ways,White Display ,Blinking Display,Blank Display

Samsung Grand Neo I9060 Power On Off Key Button Switch Jumper Ways

Samsung Grand Neo I9060 charging ok, flash ok, but not powering phone, this mean power button cut/line problem.So now follow simple power button jumper ways.

If you are facing an energy problem in Samsung Grand Neo I9060 diagrams in this article can help. Continue with the following troubleshooting solutions and establish bridges necessary for the points that have been damaged.

Samsung Grand Neo I9060 Dead does not start Solution
Samsung Grand Neo I9060 keys Power Jumper
Samsung Grand Neo I9060 On Off Button Ways

Samsung Grand Neo I9060 power button point Trick damaged bridge. Trace point of damage to the meter or check off switch with a new one. We can check problem button to connect the phone to the charger with mobile entertainment indicator appears on the screen and pressing the power button, then this is a power button problem. See diagram and apply jumpers as diagram.